 |
|
Features
|
|
Semi Automatic.
|
|
Seaming can diameter 51 mm to 178 mm and height
51 mm to 248 mm. |
|
Output 20-40 cans per minute depending on
size. |
|
By suitable accessories diameter upto 47 mm can
be seamed. |
|
Robust, and easy to handle. |
| The
Machine |
|
This
machine is a fast, semi automatic can seamer, suitable for
a wide range of cans. Changes from
one size of can another can be effected fairly
rapidly. During the seaming operation, the cans
remain stationary which makes this machine
specially suitable for canning liquid contents assuring
least spillage.
|
|
| Seamer
Operation : |
|
The
cans are fed by hand and with the can in position ,the foot
pedal is depressed .This activates the spring
head with it's four seaming rolls. Seaming is
performed in two operations. During the first operation,the
curlerd edge of the round container-end
interlocks with the flange of the can body. During
the second operation,the seam profile is completed
thus giving a compact seam that will
be hermetic during subsequent handling.
|
|
| Seamer
Specifics : |
|
Cans
ranging in diameter from 2" to 7" can be seamed
on this machine.The machine can be supplied with
individual motor drive or line shaft drive.A mechanism
is available for feeding the ends automatically. Cans,however,have
to be fed and removed by hand. Change parts comprises
of end feed,can slide can guide and seaming chuck
for each diameter.Standard seaming rolls are suitable
for cans upto 5./ " and gallon profile seaming rolls
are required for cans above 5.1/8 " diameter.
|
|
|
|
| Machine
Specification : |
| 24
DS Seamer is suitable for seaming cans within the 200-700(51mm-178mm
dia) |
| range
and 200-700(51mm-248mm) height range. |
| Output:
15-40 |
| Below
404dia :40 Cans per minute |
| 404-502:
30 cans per minute |
| Above
502-509 dia: 25 cans per minute |
| 603-700
dia :20 cans per minute |
| Arranged
for motor drive less Motor ,Starter and switch gear and Automatic
End
feed. |
| Complete
with motor base plate guard .2-Vee belts toolkit,1set of full
Electricals. cable,conduit and fittings:1-2 H.P, 930rpm, squirrel
cage T.E.F.C. Motor ,Frame number 100L to suit 400/440 Volts,
3 phase,50 cycle supply. |
| Change
parts:1-Seaming Chuck,2-Seaming Rolls,1-Can Slide Can Guide |
| 1
set Hopper change parts for Automatic End Feed |
| NOTE:
Customer to specify size and type (Std. End of Lever Lid type)
of End |
| NOTE:
By Incorporating certain additional machine parts and using
slightly different change parts, it is possible to seam cans
of 144(47mm) dia range, but without end feed. |
|
| Capacity
Specification : |
| Smallest
diameter can machine will close (special) |
1.78"Dia |
47
mm |
| Small
diameter can machine will close |
2" dia |
51
mm |
| Largest
diameter can machine will close |
7" Dia |
178 mm |
| Minimum
height of can machine will close |
2" |
51
mm |
| Maximum
height of can machine will close |
|
248 mm |
| Output,
dependent on operator |
|
40
cans per minute |
| Pulley
speed |
|
720
rpm |
| Pulley
size (2 Groove V Belt) |
6.78"
p.c. Dia |
75
mm |
| H.P.
required |
2 |
1.49
kw |
| Floor
space- Left to right |
45" |
1.14
m |
| Floor
space- Front to back |
42" |
1.07
m |
| Height
of machine |
72" |
.83
m |
| Net
weight (approx) |
1,400
lbs |
791
kg |
| Shipping
weight (approx) |
1,740
lbs |
791
kg |
| Crate
dimensions |
78"x48"x38" |
1.98m
x1.22m x97m |
| Cubic
measurement |
82.32
cubic ft |
2.33
m |
All metric measurements are approximate. |
|
| |
|
