This machine rounds flattened bodies prior to flanging. It is mounted on a tabular stand   which is firmly   bolted to the floor, and can be arranged for motor drive. On a correctly   adjusted machine, a can body   can be reformed in 2 to 3 revolutions.

  To operate, a flat body is opened slightly by applying hand pressure on the two corners   and then forced   over the steel pointed end of the rubber covere mandrel. The reforming operations is then done by   depressing the foot pedal. This causes the can body to rotate   several times between the main steel roll   and the rubber covered mandrel, there by   removing all deformation and producing a truly cylindrical body.

  (a) Special range change parts , suitable for cans between 2 1/8" to 2 5/8" in diameter.
  (b) Small range change parts, suitable for cans between 2 5/8" to 3 7/16" in diameter.
  (c) Medium range change parts, suitable for cans between 3 7/16" to 4 1/2" in diameter.
  (d) large range change parts, suitable for cans between 4 1/2 to 7" diameter.